Tuesday, March 1, 2011

HSMM: 420-430 MHz

It has been a while since I wrote on the idea of HSMM on the 70cm, 420-450 MHz band.

There have been some recent threats to the band with the proposed HR 607 bill.

So my logic to protecting the spectrum available to us, is to try and make better use of what we have, instead of letting it sit idle.

So following that logic, most of the lower part of the 70 centimeter ham band has been fairly idle. This is known as the Amateur TV sub-band (420-430 MHz).

ATV - 421.250 Video - 425.750 Audio
ATV - 427.250 Video - 431.750 Audio
ATV - 434.000 Video - 438.500 Audio
ATV - 439.250 Video - 443.750 Audio

So far there seems to be a fair number of hams interested in 802.11 based networks. But one of the big hurdles is understanding and overcoming the line of site, and other wide-band microwave propagation issues.

I've pointed out that 3 GHz is a great band since you won't be sharing the space with all kinds of other Part 15 unlicensed devices that inevitably lead to a higher noise floors and headaches.

The concept of HSMM on the 70 cm band intrigues me and others greatly because of the non-line-of-site possibilities.

A normal 802.11 channel is 20 MHz wide, but I wrote before that this can be reduced to 5 MHz.

I recently received an email from Jay Parikh with Doodle Labs mentioning he stumbled into this blog and was impressed by it.

He also wrote to bring my attention to a new product introduced by his company that would likely be of interest to the ham community.

Jay, mentions that they have already received a number of inquires from hams on it.

It appears Doodle Labs may be the first to consider offering a true non-line-of-site solution, capable of operation in the 70cm band that could easily fit into unused ATV channels between 420-430 MHz.

Doodle Labs has a new product which should be of interest to any amateur radio operator wishing to experiment with higher-speed digital data in the 70 cm UHF band. The Doodle Labs DL435 420-450 MHz OFDM Transceiver provides high-speed data in channel widths of either 5 or 10 MHz throughout the 70 cm amateur radio band.

The DL435-30 transceiver has a standard 32 bit, 33 MHz miniPCI interface and works perfectly with a Ubiquiti RouterStation. The RouterStation itself is powered via a standard power-over-Ethernet adapter. Note that the DL435-30 does have a fairly high current draw (around 2 amps) when run at http://www.blogger.com/img/blank.giffull RF output power.

The Ubiquit RouterStation or RouterStation Pro can be running either DD-WRT or OpenWrt. Note that currently OpenWrt doesn't allow manual selection of with channel width, so you may wish to try DD-WRT first.

The DL435-30 transceiver is based around the Qualcomm Atheros AR5414A baseband processer and a RF Micro Devices VCO and mixer. The DL435-30 transceiver itself "looks" like a standard 2.4 GHz 802.11g device in software, but the hardware is configured to provide a frequency offset of 2019.5 MHz. For example, if you select "2.442 MHz" in your configuration software the actual operating frequency will be at 422.5 MHz.

There are two channel widths available, 5 and 10 MHz, which are currently only manually selectable using DD-WRT and not OpenWrt. The 5 MHz channel width allows between 1.5-13.5 Mbps and the 10 MHz channel width allows for 3-27 Mbps. The modulation is Orthogonal Frequency-Division Multiplexing (OFDM) with 64 QAM, 16 QAM, QPSK, or BPSK depending on the received power level. The minimum sensitivity is around -97 dBm (for 1 Mbps). "Real-world" throughputs are around 7 Mbps for the 5 MHz channel width and 14 Mbps for the 10 MHz channel width.

Transmit power offset is an additional +10 dBm. So selecting +13 dBm (20 mW) in your software configuration would give a final tx output power of +23 dBm (200 mW). The DL435-30 has an option for using diversity antennas, with one MMCX jack for the main antenna and one MMCX for the auxiliary antenna.

With a 1989.5 MHz frequency offset, a proposed channel plan from Doodle Labs is below.

For 5 MHz BW, Center Freq. = 422.5, 427.5, 432.5 , 437.5, 442.5, 447.5 (For US and AU)
432.5 , 437.5, 442.5, 447.5 (For Canada)
432.5 , 437.5 (For Europe)

For 10 MHz BW, Center Freq. = 427.5, 432.5 , 437.5, 442.5 (For US and AU)
437.5, 442.5 (For Canada)
None (For Europe)

For 20 MHz BW, Center Freq. = 432.5 , 437.5 (For US and AU)
None (For Canada)
None (For Europe)

However, Doodle Lab's normal business model is to work with OEMs. Doodle Labs is not set up to address small quantity purchases. They are also concerned that they may get buried with the support questions. Doodle Labs has approached a few resellers to see if they can do this. But they want to see the demand first before they carry the product. So this is like a chicken and an egg situation.

Sore that reason, I've held off blogging about this exciting new development for some time, but with some limited communications with both Xagyl and Doodle Labs it appears they are at least curious about what kind of amateur market there is. Or at the very least are okay with some inquiries.

{Update 3/20/11}
After a bunch of discussion, Doodle Labs mentioned they planned on releasing a model that specifically covers the ham spectrum. (see below)

So at this point, they are still trying on getting a distributor lined up, and will be in touch with me and others who have contacted them as soon as that is done in approximately two months.

He notes the delay is actually on their side. There are some minor changes that need to be made to the design and their design team is completely swamped at the moment with a few different customer projects.

{Update 6/13/11}
Pre-Production stage. Expected availability is the end of October 2011.


Now if we can just find a OEM interested in selling this. Till then, Doodle Labs will sell factory direct.

Sept 2012:

At the September 2012 DCC in Atlanta, GA, David Bern, W2LNX presented a paper titled  "Experimenting with High Speed Wireless Networking in the 420 MHz Band."

His paper reports on testing two different manufactures of 802.11 mini-PCI cards capable of operation in the 70 cm ATV sub-band using 5 MHz bandwith.

Test applications were a Webcam video streaming program and a file download server program that ran on inexpensive netbook computers.

The test documented in his paper prove a sustainable data rate of  1 Mbit/s over 10 miles.

1 comment:

KE4AHR's AlabaHAMa said...

I am eagerly awaiting announcement as well. Even at 1W, with a gain antenna I can build a network to cover a few parts of the state. At $100 per radio, this makes it affordable to build out.

73 de KE4AHR