Microwave Projects =/ ARRL

It was very sad to read the passing of John Champa, K8OCL. He was former Chairman of the ARRL HSMM (High Speed Multimedia) Working Group. He was also the High Speed Multi-Media Radio Contributing Editor for CQ VHF Magazine.

Unlike most hams he had a high level of energy and ambition for his work on HSMM and in other areas of the hobby not well explored.

I am beginning to sound like Wayne Green with my ARRL critical comments.

But hey, they led me on, to think there was some sort of Microwave Bandplan changes in the midst. Truth is, I am not sure of the status if this, and can't get any real answers from the league.

Regardless if these jokers want to live in the past or not, here is an interesting thing to consider:

Amateur Allocations - Little known fact

Did you know in the US amateurs have access to approximately:
3.75 MHz of HF (160m-10m) spectrum
67 MHz of VHF/UHF (6m-33cm) spectrum
24.095 GHz of microwave (23cm-300GHz) spectrum

Of the above, over 99% of hams use a tiny fraction (0.3%) of the total ham frequency allocations while the remainder of our available ham allocation is essentially ignored. By the way, ARRL said that as of 4/2010, there were about 688,500 personal ham radio licenses in the USA. If only one percent of these were microwave users, that would be 6885 hams. We often hear that the majority of licensed hams are inactive. How many microwave experimenters do you know?

Source: hsmm-mesh.org

The realization occurred I was just a Technician over 10 years ago was that wow, there is a lot to explore and learn in the Microwave arena.

Since then I have learned a lot and found it absolutely critical to have that under your belt.

I remember reading the HSMM partnership with the North Texas Microwave Society when John, K8OCL moved to Texas. And have to concur that is a great idea.

Since the ARRL has been so quiet, I have decided I need to do the same. But I will be supplementing my blog space with more technical microwave experimentation articles in hopes of helping spur others on.

Since the mid-90's when I got into the hobby I have been connected to a then- high-school technology club. Ever since the same basic group of now 30's aged guys get together to shoot-the-shit, complain about the ARRL :-) and most importantly see what we can build.

What you will notice from my future blogs is that there have been few HF related projects, and many microwave. As it should be.

It's a shame the ARRL doesn't understand simple math. There is far more to lose in our microwave spectrum than HF. Because there is tons more of it, and hardly any hams use it, and the commercial squatters actually see it as useful spectrum.

Hmm, if only we could do more than throw money to protect spectrum. Perhaps the following microwave projects could be QST material to help foster so actual use? Naa.. that is right we don't want to make anyone smarter. I am a believer that if ham radio is to evolve, then QST needs to. The concept that QST needs to continued to be watered down just doesn't stick with me.

The Proposed NTIA "Fast Track" Spectrum Reallocation shows that our 2.3 and 3 GHz allocations may be endanger. So to start off here is a 4 watt power amplifier for 2 GHz.

Our Community Leaders

I just received the December QST Magazine. There wasn't anything that really to terribly interesting and usefull for me in this issue again (sigh)... However the "It Seems to Us" editorial did catch my eye.... (here is a snippet)

Our Community Leaders

"Why do people become radio amateurs? If you ask new licensees, frequently you will hear that they are interested in radio technology or that they want to be prepared for emergencies and to provide public service communications. But there's more to it than that."

In general, people join groups with whom they have something in common and whose company they enjoy. Sometimes a desire to learn - to tap into a body of knowledge and expertise - is the motivator. At other times, sharing a common goal is enough to bring people together who might otherwise have no occasion to interact.

Amateur Radio is a global community. We can lay claim to being the first technology-based social network. The common goal that sparked the creation and early growth of the ARRL was the desire to develop a network of relay stations to overcome the limited range of the crude radio equipment of the day, so that amateurs could exchange messages with others well beyond the reach of their own stations.

Read the whole thing in the December QST, Page 9.

It's kind of interesting and fitting as I re-post this on a different social network. Oddly enough, where sharing expertise and knowledge doesn't require you to at the radio at the time of relay... A different demonstration of global communication nearly 100 years later.

It's also important to realize that the primary leadership role of a club is likely changing.

In the 90's maintaining a local repeater (or two) was the key to the local ham radio social network.

As more hams have since gained access to the internet and cellular phones, and now social networking sites online the repeaters are less active and less important.

It's time to step back and reevaluate the clubs role and priorities in 2010 and beyond.

And finally I have to repost this from Wayne Green's 11/01/10 blog:

A Ham Note

A note from Ben Alabastro W1VM chuckled over the September 2010 issue of QST having an article on a solar-powered repeater…and the Ham Radio December 1978 issue having an article on solar-powered repeater design. Glad to see you guys in Newington are still right on the ball.

Far's I can remember, our champions at the ARRL have never pioneered any new ham technology. To this day they're still pushing CW, a hundred-plus-year-old technology....

As pointed out, good leadership is hard to find at a national level. In summary: Local clubs really need to put more emphasis on leadership.

Kenwood TKR-850 as a D-Star Repeater

In my opinion this type of thing needs more attention. After all do-it-yourself has long been a hefty part of this hobby. And there is no better way to learn than a hands-on project like this.

Reason number two would be economics, but I think that is obvious.

The third is spectral savings. D-Star is narrowband, but buying a new system just robs another frequency pair from the pool. It seems people rarely take repeaters off the air, even if nobody really uses them. And these days it seems there are more repeaters in a geographic area, than there is activity.

So it seems best in my mind to convert something already out there. This would make a great club project.

This is great example of continued innovation of D-STAR technologies by incorporating non-Icom products into D-STAR environment.

Date: Thu, 07 Oct 2010 05:32:17 -0000
To: dstar_digital@yahoogroups.com
From:
Subject: K8BIG Port B Using Kenwood TKR-850 Interfaced to ID-RP2C

The K8BIG Port B D-Star Repeater in Cincinnati, Ohio is successfully running using a Kenwood TKR-850 Interfaced to the Icom ID-RP2C in place of the Icom Band module (ID-RP4000V). The usable range of the repeater has been effectively doubled from around 25 miles radius to 50-55 Miles radius.

The K8BIG system is on the WCPO-TV Tower overlooking downtown Cincinnati, OH with the antenna at 700' AGL. There are 3 50,000 Watt FM Radio transmitters, 1 250,000 Watt VHF DTV Transmitter, and 2 3,000 Watt LPTV stations on the same tower along with various commercial VHF/UHF/220 transmitters so the RF environment is pretty harsh - add in the neighboring (2 Blocks) tower with a similar complement of transmitters and it is downright brutal for any radio equipment.

The Icom band module was being swamped by the high RF levels at and surrounding the site, causing very poor effective receive sensitivity even after the TX-RX BpBr Cans and an additional band-pass cavity. I had partially remedied this with one side of a reject-only mobile duplexer, but that introduced around 6 dB of insertion loss. Even with the 6 dB insertion loss the effective sensitivity was improved. The Kenwood repeater has a much tighter front end and much better selectivity with adjustable front-end helicals so the additional receive filter is not necessary and the 6 dB insertion loss was removed.

After the interface was built we were able to plug and play into the Icom ID-RP2C controller and gateway. With the exception of the increased range there is no operational difference in the repeater - everything works identically to the Icom band module. Commands work, data works, D-Rats works, etc.

I will be building more of the interfaces shortly which can be used to interface any 9600 baud-capable analog repeater directly to the ID-RP2C. Anyone interested please let me know.

Thanks.

Dan Woodie
KC8ZUM

You may want to look at;
Michael, VK5ZEA's Homebrew DV Node Adapter to ID-RP2C interface.

John, K7VE's Kenwood TKR-820 Node adapter retrofitting.

And/or my Motorola GM300 retrofitting and commentary.

As a technical side note, one thing to consider when converting analog repeaters is the receiver IF bandwidth. To date there has been little discussion on narrowing receivers bandwidth to match the narrower D-Star signal. Just be aware that converting a 1950's era repeater to D-Star that might have a 60 Khz I.F. would be vulnerable to adjacent channel interference. A good overview of the theory can be found in a reprinted article from Ham Radio Magazine 1985, by WD5IBS.

60 Ghz and the Future

In one of my earlier blogs, I pointed out that about 40 years ago 2 meters and 70 cm were basically uncharted areas. Now they are populated. Undoubtedly the future of ham radio is in our huge - virtually unused microwave allocations. They have the necessary bandspace to support wideband modes.

Jim, KC4BQK was first to repost this good video about 60 Ghz and the future of LANs. Blogger Craig Mathias from the Fairpoint Group dose a good job explaining 60 Ghz and the difference between WiGig and WiMedia. This could be something in the future that could include Ham Radio.


Check out his blog http://www.networkworld.com/community/blog/3436

Linux Speech Recognition

I've been looking for Automated Speech Recognition for Linux for a while. I keep seeing Dragon Naturally Speaking on the selves locally.

I have read some discussions where people have gotten Dragon to work under Wine. But I really need something that works standard in and out style, so I can script things to work with it.

I have all kinds of ideas for two-way radio integration and Asterisk projects. If only something existed.

I have played with CMU Sphinx in the past, but it's not as developed as I'd like.

If anyone has experience in the area of Speech Recognition with Linux, I'd like to hear from you. Ideally I am looking for something that is under $200, and works as well as Dragon. It need not be open source, just Linux compatible.

Specifically if anyone has experience with Voxeo's Prophecy, or LumenVox, I am eager to hear more.

I doubt this online petition for a version of Dragon Naturally Speaking for Linux, will convince Nuance Communications, but I suppose it's worth a try.

Miscellaneous HSMM

For those not aware, a normal 802.11 channel is about 20 MHz wide.



The Atheros Chipset used in some of the professional grade 802.11/Wifi products (like Ubiquiti) can support half (10 MHz) and quarter rate (5 MHz) channel widths.



Obviously the maximum data rate (normally 54 Mbps for a conventional 20 MHz wide channel) drops, but even at quarter rate is still very usable with a maximum data rate of 13.5 Mbps.

The open Atheros driver talks directly to the hardware abstraction layer (HAL), and is also capable of frequencies outside of the Part 15 band.

[For a while no open source HAL's existed that can let you do 5/10 MHz mode. You had to use MikroTik, StarOS, IkarusOS, DD-WRT and a few others for these modes. As of June 2010, it appears that 5/10 Mhz support seems to be implemented in ath5k now.]

You can see the feasible channel selection overlay here:
http://www.qsl.net/kb9mwr/projects/wireless/allocations.html
The channels in light blue fall into overlapping amateur band space. And are acceptable for HSMM operation.

As you can see you can squeeze seven 5 MHz wide channels below the first Part 15 channel on 2.4 GHz, two of which are completely outside of the Part 15 overlap. (Thus, should have quieter noise floors)

On the 5 GHz band, there are thirteen channels that are completely outside of the Part 15 overlap.

And even more interesting is that that within the Atheros chip it is possible for licensed developers to enable a local oscillator generation for a direct conversion radio transceiver. This is Not an open function, but irregardless, this is how 802.11 products on 900 MHz (Ubiquiti XR9), and 3 GHz (XR3) (as well as other places) are possible and on the market.

Open source drivers unlocked the possibility of additional frequency support. It allows programmers to be able to write a driver. In summary; Atheros has allowed a third party to create a layer between the low-level functions of its chips and high-level drivers via the madwifi/ath5k development.

So what about unlocking additional channels in other chipsets/hardware?

Broadcom is the the chipset of most common Linksys WRT54G routers.

Broadcom has for a long time declined to provide non-licensed access to it's chips. A project that has been working to reverse engineer access using legal means had released its first working drivers for Broadcom 4300 series chips a few years ago.

If you are into the nitty-gritty, a recently released (2010) Broadcom wireless driver seems to have structures which imply the PHY in the chips can be directly controlled to program HSMM channels.

Also see:
http://lwn.net/Articles/456762/

http://linuxwireless.org/en/users/Drivers/brcm80211

For a slightly less technical overview of the various aspects of Modifying Consumer Off the Shelf Wireless LAN devices for specialized Amateur use, have a look here:
http://www.qsl.net/kb9mwr/projects/wireless/modify.html

---

I was recently asked my opinion about the use of Amateur Radio Networks like HamMesh, HamWan and BCWarn.

The question is pretty generic.  It all seems to stem from the ARRL HSMM working group from a number of years ago.  Despite that group falling apart, independently amateurs all over the place have embraced the technology.  It's great in my opinion.  As interest in voice  repeaters continues to wane, multi-media networks do make perfect sense.  These more modern types of networks have the potential to draw new blood into the hobby.  New hams who have software skills that can help the community with software defined radio and so forth.

Outside ham radio, as consumers were now live in a world where to keep thing interesting and new we have a flexible application space.  Be that apps on our phones, software on our PCs, and even firmware updates to our more hardware like devices.

That that has been notable absent in ham radio.  I.e. What it is when you buy it, is what it will be 5 years from now unless you want to totally replace it for the tune of several hundred dollars.

Ham radio used to be a good starting place for many who later entered broadcast and electronics careers.  Today those positions are few and far between due to disposable electronics and consolidation of engineers with mega broadcast groups.  What is the most notable/abundant "tech" career today is IT (information technology) work.

In my humble and simple opinion: These types of networks are long over due, and I am glad they are continuing to grow.  It helps ham radio stay relevant.

73'
Steve, KB9MWR
 

HSMM network in California

Jason Spence, KF6RGF writes that there is movement in the San Francisco, California area to build a HSMM network. He needs volunteers with access to towers to help build it out. More information can be found here:

http://www.noisebridge.net/wiki/HInternet

Overview:

The amateur radio service has a good chunk of the Internet address space (44.0.0.0/8), and it's not being used for its intended purpose: a worldwide packet radio network. Meanwhile, the rest of the Internet is crowding into the remaining address space and will no longer have any left in the near future.

The address space isn't being used because of a chicken-and-egg problem: the necessary digital repeaters aren't available for users, and there are no users to justify building the repeater network.

The cost of the equipment has finally come down to the point where even a modestly funded amateur radio club can afford to set up a small regional network by themselves. Through advocacy and standards development, Noisebridge is building a packet radio network modelled on the original vision of the Hinternet.

Members of Jason's group will be touring the SFBA ham clubs and giving presentations at their monthly meetings to gather the necessary volunteers.

Miscellaneous D-Star Developments

I've been backing off on the D-Star blogging. But here are a couple interesting developments that you'll likely never read about on any of WB9QZB's yahoo groups.

The first comes from DARPA (The Digital Amateur Radio Projects Association)

World Wide Routing for DSTAR

Hello to the group,

The gateway is now turned on and now we can play around with routing. But here is the catch.

The routing is a new world wide routing system call ircDDB (built by the Germans). It will route to both D-Star system that joins the world wide routing scheme.

The two D-Star systems that can handle routing are the US ROOT, which is made up of only ICOM and one Home brew system; and the Multi-Trust Servers that the Europeans built with the help of a few here in the US. There system is made up mostly of Home Brew and some ICOM systems. Of course the DARPA gateway (KJ4NYH) is built under home brew network (Multi-Trust Server). So with the new routing scheme we can now route to US root or anywhere else that has the same system.

More US gateways are joining this new routing method because it’s faster than the US ROOT routing.

You can view the dash board at http://ircddb.net/. Look for Gateway KJ4NYH on the dash board with a green light that means it ready for routing.

So what can or where can we route to? Well you can route repeaters/area gateways and also call signs that are placed in the UR Field, i.e. W4AES is the gateway for Orlando, FLA so my UR field will look like this—> /W4AES C.

Give it a try and see what will work. Just check out the dash board and look for US calls.

73

Will – W4WWM

Digital Amateur Radio Project Association – DARPA
Expanding the digital experience.

And here is a good video overview from Michael, VK5ZEA demonstrating it.

---

The second, is a note from Ramesh, VA3UV on his Free Star* Project.

I started working on a project called 'FREE STAR*" about a year or so ago. FREE STAR* was an attempt to build a vendor neutral digital communication network and allow bridging between various VoIP protocols that are in use amongst radio amateurs today (app_rpt, IRLP, D-STAR, etc.).

I'll keep this brief - further info can be found on my website:

http://www.va3uv.com/freestar.htm

We have built a few systems on top of our Allstar / ACID boxes, they seem to work well.

Cheers,

Ramesh, VA3UV

Allstar Node 2200 > Bridged to XRF005A.

DIY Emergency Cell Tower

Chris Paget, KJ6GCG has over a decade of experience as an information security consultant and technical trainer for a wide range of financial, online, and software companies. Chris' work is increasingly hardware-focused, recently covering technologies such as GSM and RFID at venues such as Defcon and Shmoocon.

At the recent Defcon 18 conference he displayed a spoofed GSM cellphone tower using a Universal Software Radio Peripheral (USRP) transmitting 25 milliwatts, to present a GSM air interface to a standard GSM handset and uses the Asterisk software PBX to connect calls. The combination of the ubiquitous GSM air interface with VoIP backhaul could form the basis of a new type of cellular network that could be deployed and operated at substantially lower cost than existing technologies in the developing world.

http://openbts.sourceforge.net/

FCC rules aside, this is some powerful stuff. Imagine being able to restore cellular coverage in a disaster area using the foundation he has laid.

You can read more here:

http://www.networkworld.com/news/2010/083010-open-source-voip-cell-phones-at-burning-man.html

Here is a video that shows a test call being placed from a softphone talking to an Asterisk PBX in conjunction with GNU radio and a USRP to create a Part 15 signal level call to a cellphone.




Regarding using HSMM style techniques for running an amateur cell site:

http://www.innismir.net/article/513


Here is a similar project which modifies android phone to use asterisk running on something called a mesh potato. This would be great for developing areas. Just drop some of the MP's with a battery and a solar cell and poof... a phone system.

http://www.villagetelco.org/

Another favorite is using asterisk with amateur radio and repeaters

http://ohnosec.org/drupal/

HSMM Mesh Network in Texas

In Collin County Texas a groups of hams have been making good use of HSMM technologies to update their Amateur Radio Communications Health-care Emergency Services (ARCHES). This was traditionally setup of two meter/ 70cm voice and packet radios at 9 Austin, Texas area hospitals.

The setup provides key patient data to the City of Austin Emergency Operations Center, during significant incidents, even if normal communications are unavailable. It's highly successful. During every activation, patient data and other traffic passed more quickly and accurately than all other techniques tested during the activations.

The ARCHES program has been so successful, we have been asked to expand the system to ~ 40 additional area hospitals and clinics in central Texas.

Due to the existing significant number of packet collisions using traditional packet radio with just 9 nodes, they are migrating to HSMM.

With 40 or more packet stations in the area, passing packet data could slow to a crawl due to packet collisions.

The stations could only transfer data at 1200 baud, at best. Attempts at using 9600 baud showed that common radios do not pass 9600 baud data well. They distort the data so badly, that many resends are needed to get data through.The effective data rate seldom exceeds 1200 baud.

The HSMM proof of concept was demonstrated least year by AD5OO, NG5V, and KD5MFW who achieved a 10 mile point to point link across downtown Austin, Texas using only 35mw.

The Austin HSMM SIG has incorporated Optimum Link State Routing (OLSR) into custom firmware to provide automatic linking of radios that will be placed on Water Towers throughout Collin County Texas.

For more info see: http://hsmm-mesh.org

HSMM VOIP Network in Spain

There is an interesting HSMM/ Asterisk VOIP network in Spain:

http://translate.google.com/translate?hl=en&sl=es&u=http://www.bicubik.net/hsmmn/

Alex EA5HJX, Andres EA5HIQ, Pepe EA5SW, Paco EB5HTC, Javier EB5BXA, Boletin EA5SW, Paco EB5EA, Sergio EA5HFB, Ernesto EB5JDY and several other hams are researching new technologies and telecommunication systems.

Can you explain are in street language, What is Intended and this project will bring to ham radio and its benefits?

So we can all understand, a HSMM network is just one of many highway lanes that can move large amounts of data at high speed. What would be technologically wireless broadband network of high capacity in her ability to integrate all technologies: RF, VoIP, multimedia, data ....

What are the Objectives of the Project HSMMN?

To promote knowledge and new technologies to the general public: The HSMM project has not only a technical aspect but also a social aspect, with aims to bring new technologies and their application in the real world to the public with expertise or not. Disseminating knowledge and new technologies to the general public: The project has HSMMN Not Only But Also to Technical aspect of social aspect, with aims to bring new technologies and their application in the real world to the public with expertise or without them.

We intend that anyone interested can collaborate, learn and practice the knowledge acquired. Anyone interested can collaborate, learn and practice the acquired knowledge. To this end, talks and workshops are planned in various radio clubs and associations interested in the project. To this end, talks and workshops are planned in various radio clubs and Associations interested in the project.
    
Creation of a research group developing new technologies to the world of amateur radio: This project not only aims to develop the network, which is the chief end of it, but to bring together people interested in researching and learning about new technologies to help amateur radio operators and emergency services communications.

Unifcar technologies: using computer systems and hardware elements to create an IP data highway you can travel by all types of information: audio, video, telemetry, APRS, etc ...

Collecting, processing and sending information through a variety of different technologies such as for sending APRS weather information (winds, rainfall, air pressure, barometric pressure, etc)

Ability to provide automated voice announcements from a centralized control room radio repeaters as required. Capacity to Provide automatic voice announcements from a centralized control room radio repeaters as required.

Creating an information service of communications systems available by region, by using a geographic number to gain access from the fixed, mobile and IP (VoIP).

Integration of other communication networks: IRLP, DSTAR, WIRES-II, E-QSO, etc.

Interconnection of repeaters using wireless technologies: Wireless, WiMAX. Each repeater could put a computer capable of processing all the telephony and transform it into Voip (voice over IP) that is transported through the network to reach another repeater HSMMN and is decoded by joining together all repeaters creating a mesh. Each repeater Could put a computer capable of processing all the telephony and transform it into VoIP (Voice over IP). That Is Transported through the HSMM network Reaches Another repeater network and is decoded by joining together all repeaters creating a mesh.

The whole process will be use Free Software.


Entities in the world of emergencies communications in Spain have shown interest in this project as an additional operational tool to consider for future medium to long term. Access from the PSTN will be in collaboration with guifi.net. This is an area open, free and neutral telecommunications network built through a peer to peer agreement where everyone can join the network

It looks like a nice mix of HSMM, Asterisk SIP and app_rpt technologies.

Alex Casanova EA5HJX, writes that he is working to develop a box that is a router (IP), and Asterisk (VoIP) and gateway with radio (analog and digital radio). Maybe this box can help in disaster like Haiti. Around the HSMMN´s Project we are investigate to integrate Asterisk VoIP with analog or digital radios.

Keeping relevant & moving forward - case in point

The following is a partial excerpt from a presentation by Glenn Currie, KD5MFW at Ham-Com 2010 held June 11-12 in Texas. (You can read the full presentation and others at: http://www.hsmm-mesh.org/)

Those deploying communications technology in developing countries are deploying systems in areas where there is little or no infrastructure... much the same as after a natural disaster.

They are using wireless mesh systems for much of their infrastructure. When you have no infrastructure due to disaster, natural or otherwise, Wireless mesh networks are being deployed.

An organization called Inveneo works to bring communications infrastructure to under developed countries.

They use Wi-Fi (802.11) wireless broadband equipment for much of their work. They set up Wi-Fi communications links and add their own resources including small web servers and end user net top computers so people can send email and check websites for emergency information.

Inveneo deploys to Haiti after the recent earthquake. The got in fast with gear and two man teams.

Inveneo installed a Wide Area Network using Wi-Fi type equipment. Inveneo quickly deployed an emergency network that served many agencies

Amateur radio passed some traffic in the aftermath of the recent Haiti earthquake. I have read the reports on the Internet and in the printed amateur radio magazines. Hats off to all the hams that pitched in and helped strangers in a bad situation.

But what systems past what percentage of the emergency traffic during the emergency? What really worked and carried the bulk of the emergency traffic?

It is known that the network deployed by Inveneo passed Thousands of Messages for multiple agencies, and their networks continue to pass traffic.

Amateur radio needs to have a broadband offering in their tool box.

All emergency communications organizations are making wide use of broadband RF communications techniques – except amateur radio.

I am confident, that if amateur radio manages to remain relevant, in the area of Emergency communications, future amateur radio license exams will include questions On how to configure wireless routers. This technology is that pervasive in the world. Hams can step up to the plate get into broadband, or they can leave it to groups like Inveneo and Part-15.org to provide emergency communications, in the ham bands.

I recently tried to point out that WinLink is showing its age and is far from ideal.

I was trying to suggest that we focus our efforts on the future, and made reference to a geostationary satellite as one avenue.

I received a bothersome/bullheaded comment from Stan Piekarczyk, Outagamie Co ARES EC "Should we wait another 10 years for this to get launched?"

To answer the question, NO!

The first step is admitting that something isn't cutting it, or is less than desirable. Step two is making it happen by stop being an amateur radio user, and becoming an innovator.

Ham radio technologies can Only advance if We make the happen. Glenn, KD5MFW points out some wake up calls for hams in his presentation. It's time to think ahead.

KC4BQK also blogged on this:
http://kc4bqk.blogspot.com/2010/07/january-2010-haiti-had-devastating.html

Digitally Linking Analog Repeaters

Those from Wisconsin might be familiar with the Wisconsin Interstate Network. It's a wide area coverage UHF linked repeater system, composed of nearly 20 systems throughout the state. It is all RF linked, so from an emergency commutations standpoint it's very handy resource.

Now imagine if you can if it was all linked digitally, but still using RF, not the internet.

It would not be very expensive to convert the analog audio to digital at each site and run inexpensive outdoor ethernet cable up the tower instead of a hardline line for linking. Since each analog repeater site is at significant heights, achieving line-of-site linking on 3 GHz or 900 MHz should be possible.

If you did this, you would have a high-speed statewide digital RF backbone independent from the internet, that not only connects all the analog sites, but has plenty of bandwidth left over.

ARES / user LAN access could be on 440 or 900 MHz. I'm talking about sending 20 MB of pictures from your ARES incident across the state in seconds. Or hooking an IP phone up and having a fairly secure conversation if the situation warrants it.

All this is possible, all fairly inexpensively. You just have to think different.

Wecomm is a smaller linked repeater network project going on in the state, that I have blogged about before.

They are building data networks into their site deployments.

What I am showing above is a very inexpensive way to stream audio digitally. Wecomm (so far) has been using expensive JPS Ratheon ARA-1 radio interface devices to accomplish this.

USB server adapters are fairly new. They allow you to use USB devices as network devices... cheaply.

When you are dealing with many sites, far away, the idea of having a computer at each site is less than ideal. Fairly inexpensively you could build a computer with no moving parts using flash drives to increase reliability..... But can you do this for under $50?

If a plug and play solution is what you seek, check out the CAT CL-100 Internet/802.11/HSMM Linking Controller.

Ham Radio in KA9Q's eyes

It took me a while to find this snippet of comments from Phil Karn, KA9Q in WT Docket No. 97-12 from about 10 years ago:

....amateur frequencies are still occasionally involved in emergency communications despite being almost completely eclipsed in recent years by cellular phones, portable satellite links and the like. But the amateur service has always been primarily an experimental, technically-oriented service. It is not a critical operational safety-of-life service like public safety or aviation, nor is it a common carrier utility like cellular telephones....

For those of you who aren't familiar with the Phil Karn, KA9Q:

He is an engineer that worked for Bell Labs in the 70-80's. He was on the ARRL future systems committee/Technology Task Force for nearly a decade. He had had his fingers involved with many Amateur Satellite Service projects.

Has helped develop the Internet as he as been a strong contributor to its architecture. (His name is on at least 6 RFCs, as a member of the Internet Engineering Task Force)

He is well know for his work with digital communications specifically with DSP and forward error correction (FEC) and spread spectrum.

Since 1991 Phil was been with Qualcomm, a wireless telecommunications research and development company, as well as the largest cellular chipset supplier in the world.

Simply put: Your cellphone works on CDMA technology that Phil Karn helped develop. Phil is the best example I can think of where ham radio served as an "experimental, technically-oriented service" that served(s) as a breeding ground for technological development that later the rest of the world greatly benefited from.

An Univeral Radio Interface

All of the various digital modes out there require some sort of interface to your soundcard. Most of these interfaces use the serial port (RS-232) for keying, or some of the newer "Rig-blaster" interfaces can do provide that over a USB connection in the absence of traditional com ports on the newer computers.

There is still one thing lacking. Their own dedicated sound card. There is nothing more embarrassing than forgetting to disable your computers system sounds. And on the same token having to mess with the mixer settings each time is also annoying.

Thanks to the hard work of Steven Henke, W9SH and Jim Dixon, WB6NIL, they have ground work for a Univeral Radio Interface.

You can build your own using inexpensive USB sound FOB's/sticks. Or you can buy a pre-manufactured interface from DMK Engineering.

The basis of it all is the C-Media electronics CM-108, CM-108AH, or CM-119 USB interface chips.

PTT and optional Carrier Detect are accomplished using unused general purpose I/O lines of the USB sound devices chipset. Just plug this into a USB port of your computer, no other connections to the PC are necessary!

If you build your own, the sound fob will require some modifications to bring out PTT, block DC on the audio outputs, and attenuate the receive audio to match the microphone levels.

http://www.qsl.net/kb9mwr/projects/voip/USB-FOB.pdf

http://www.qsl.net/kb9mwr/projects/voip/usbfob-119.pdf

Unfortunately the number of programs that support this type of interface are presently limited. The good news is any one coding a program like ham radio deluxe or the like can easily adopt support for this interface. The channel driver is open and authored by Jim Dixon, WB6NIL and Steve Henke, W9SH.

If you an author of such a program you can find the definition in file chan_usbradio.c. I encourage you to add support for this inexpensive to build interface.

WinLink Failure

At the April 8th meeting of the Green Bay Mike & Key Club, Dennis, KC9OIS had an ARES report on a demonstration of a mobile Winlink station and it's emergency email capability.

The station was setup by Outagamie County ARES at the Paper Valley Hotel in conjunction with the WI ARES/RACES at the WI Governor’s Conference in March on Emergency Management....

While the demonstration was successful, John, NA9J and my (Dennis, KC9OIS's) messages never reached their destination successfully.

Paul, N5XMV writes:

I don't see the purpose of continuing to find new ways to use Ham Radio, whether for experimental, emergency, or commercial use, if the average Ham is not able to understand the full concept, build it, and implement it... What happens when it fails, reach over, and get a new piece out of a stockpile of new stuff??

Paul, N5XMV, makes a good point. Emergency communications weakest link is in the operator behind the equipment.

At the same time, exercises and demonstrations like this let you experience the mistakes and correct them before the time comes that you actually need to rely on it. My question is what is being done to prevent a repeat performance?

I don't know much about how the Winlink network works. But it seems to me that if "emergency" messages can be lost, this is Not a well thought out design.

Are outdated networking protocols are the basis of Winlink? It sound like a kludge of much how the old KA-nodes worked, and the hierarchical BBS message forwarding using a system of mail rewrites and mail exchangers.

Ouch!

RFC's for SMTP mail delivery ensure that the sender should get a return message in the event that a message is undeliverable to to a broken path route or server being down. If Winlink cannot at the very least support this, perhaps it's time to re-think the network topology.

Think "real-time network" .... it can be done. In the 90's we here in Wisconsin could test the deliverability of a message with the ping command.

traceroute is another good network debugging tool.

Here is an old reference on Emergency Operations and Packet Radio
http://www.qsl.net/kb9mwr/wapr/wiscnet/part31.html

Here is some interesting history on Winlink.

July, 2003: In cooperation with its partnership with Homeland Security & at their recommendation, the ARRL Board sought to provide a Nationwide digital system to enhance the communications capability of the Amateur Radio Emergency Service (ARES) There are situations, the Board said, when ARES "must have the capability to pass digital traffic across the Nation quickly and accurately.

ARRL Resources Volunteer Committee determined that the new network should: provide rapid transfer of emergency traffic between sections; use available and future digital modes, interface with commercial communications systems such as conventional telephone, cellular telephone, and the Internet, etc., have speed, performance and accuracy.

The digital network will provide a value-added service for ARES and will continue to be viewed very positively by our served agencies," the committee said in its report. "This allows ARES to be viewed as modern and necessary instead of antiquated and invasive."

A quote from the former FCC Director of Engineering and Technology:

In the past, hams have adopted more spectrally efficient technologies - for example, by migrating from double-sideband amplitude modulation to single-sideband modulation and, more recently, by shifting to more efficient modulation for digital modes. I would urge you to continue shifting towards more spectrally efficient communications techniques - especially digital techniques. Such a shift has a number of benefits:

First of all, it demonstrates to policymakers and regulators that you are good stewards of the public's airwaves even without direct economic incentives.

Second, by using what you have efficiently, it strengthens your case when you need to ask for additional spectrum.

Third, by allowing more users to access the available allocations simultaneously, it improves the amateur experience and ultimately increases the attractiveness of the service to new and old users alike.

Fourth, it provides the opportunity or "headroom" for increases in data rates to more closely match those available on wire line networks and, in the future, on commercial wireless networks as well.

Fifth, as the rest of the telecommunications world makes the transition to digital techniques - and there are very few exceptions to that trend - the amateur service will look antiquated if it is not making progress in that direction as well. So looking to the future of the amateur radio service in the new century, I would urge you to continue your traditional role in public service by being prepared for and providing communications in times of emergencies, conducting experiments, providing training in radio communications, and encouraging international comity. But I would also urge you to focus particular attention -- for the reasons I just mentioned -- on experimentation with digital techniques."

So far the basis of Winlink on a county/state level seems to rely on 30 year old packet radio technology.

For example it will take over and hour to send a 540 KB .xls file of names... or in just a half an hour you might be able to send a 270 KB attachment at 1200 baud.

So even if the demonstration messages would have made it, Winlink still appears as a failure to me in that regard.

NWR SAME software decoder?

Server weather season is upon us.

I have often thought it would be nice if there was an open source (soundcard/ FOB based) SAME decoder solution.

One could dedicate a cheap USB sound FOB to a receiver parked on their NOAA weather radio frequency that would sit and decode any SAME data bursts.

I am thinking for interfacing to repeaters to provide custom weather alert signaling.

It does appear that software to decode SAME data exists, just not open source.

http://www.dxsoft.com/en/products/seatty/

A SAME software decoder would benefit projects like thelinkbox, and asterisk app_rpt as well as other projects.

{Update 6/11}
Greg Hewgill, has updated the source to his NWR tools, now at:

https://github.com/ghewgill/nwr


"Drew" Kirkman, W4KMC writes:
"TECHNICAL INFORMATION:
NOAA’s Specific Area Message Encoding (or SAME) protocol is used to further streamline the Emergency Alert System. Information about an emergency message (such as locations affected, type of message, where it’s coming from, and how long it will be considered effective) is transmitted in the form of digital bursts at the beginning and end of said message. These bursts are AFSK-modulated data with a throughput of 520.83 bits per second. Mark tone (binary 1) is 2083.3 Hz and space tone (binary 0) is 1562.5 Hz, with each tone lasting about 1920 microseconds. Bytes are transmitted in reverse order (LSB -> MSB), that is, 00010111 would be transmitted as 11101000. There are other technical specifications regarding its use in the real world, but it’s irrelevant here. Essentially, if you handed the right text to it, I have a SAME encoder. It outputs true SAME-encoded data."

See his NOAA SAME web based audio encoder/decoder at:
http://www.drewkirhttp://www.blogger.com/img/blank.gifkman.com/projects/noaa-same/

I also stumbled into:

"Using an Arduino Uno and a few other external components, I've been able to reliably decode the SAME messages."

http://www.raydees.com/Weather_Radio.html

{Update 2012}
Someone updated multimon, and it now has EAS / SAME decoding support!
https://github.com/EliasOenal/multimonNG/blob/master/README

And this PHP-based SAME AFSK encoder: http://www.whence.com/minimodem/

DIY Compatible D-Star Repeater - Green Bay

I have an experimental 440 MHz analog repeater that has been converted to D-Star. The GM300 radios have been interfaced using a Mark Phillips, G7LTT GMSK node adapter clone. The node adapter is in a duplex configuration, so in reality it has nearly all the functionality of an Icom D-Star repeater.

A D-STAR repeater is an expensive proposition. And many people are not happy with the Icom D-Star repeater performance. It's a number of things, most notable the poor receiver sensitivity. ~.45uV... In many cases the "repeater" is nothing more than two 28XX series radios in a rack mount box ... Pictures in the d-star digital yahoo group confirm this. Receiver desense is also on the list due to the use of plain-jane RG-58 inside the units. In addition, the receiver is prone to overloading by out of band high power FM broadcast signals.

Apparently the Icom G2 software is also not impressive, as discussed on the D-Star Gateway mailing list back in November 2009.

To build this adapter the cost about $100 (+ your analog radios) as compared to the cost of a Icom RPC-2 Controller plus a RF band module at about $2900.

For the longest time I was running Mark, KB9HKM's DVAR Hotspot Windows based software to compliment the board. For remote repeater site use I haven't been real keen on the idea as Windows computers seem to need reboots at inconvenient times.

So I have had a watchful eye on two Linux developments.

The first is by David, G4ULF, but he is still in the midst of releasing the program.

The other (probably less prominent) is by Scott, KI4LKF. His "rptr" program is available now.

All-in-all, I'm happy to report, version 2.93 has been running stable for me. Under Linux at least I have been able to script some ideas by trapping the debug messages with Perl.

For now, the frequency is 441.4625 +5 (SNP) The 40 watt GM300 radios are running cleanly at 20 watts.. The repeater is located in the village of Allouez near Heritage Hill State Park. The antenna is a Comet GP-6 Omni (9 dB), at about 35 feet. It is fed with LMR-400 coaxial cable. It appears to have about a 15 mile coverage radius.

Maxtrac/GM300 radios have a jumper inside (JU551) that sets whether the external connector will have flat or discriminator audio. You want discriminator. You may also need to add some 10 uF DC blocking caps on the RXA and TXA lines.

For more Information on the GMSK/ DSTAR Node Adapter/ Hotspot, please visit the websites below:

http://www.dutch-star.eu

http://www.gmskhotspot.com

http://d-star.dyndns.org/

Specifics on node adapter setup

If you are seeing what else you can do on a Linux platform with D-Star, I'd love to hear more about it.

{Edit Oct, 2010}
You may also want to take a look at John, K7VE's recent blog where he converts a Kenwood repeater for D-Star.

{Edit Nov, 2010}
And a Cincinnati OH, club using a Kenwood TKR-850

Reasons to like / dislike D-Star

Here is a thought from a local club member that contacted me about D-Star:

The thought occurs to me that D-Star is one future standard and why not purchase a D-Star radio ahead of the roll-out? One issue is that it adds expense and why buy something today that you can’t use when the standard may evolve to something better in the future. Therefore, a waste of money now?

He actually has a good thought process. The thing I see is that since D-Star is based on the JARL standard, some parts of it cannot change. By that I mean, GMSK modulation and data rates for example. Evolve, yes it already is, and that is why I like it.

What he means is be replaced (not evolved) by something else radically different, perhaps TDMA based or what have you.

My feeling is that this is not a big consideration/fear simply because ham radio is in such a decline. You will likely never see another replacement simply because it's not on ham manufactures priority list as they market is simply not there.

Resons I like D-Star:
I've been in the hobby for nearly 15 years. I'm starting to become a been there, done that kind of guy. This is something different... a step in the right direction, to the future.

From a repeater stand-point the slow speed data & voice are not only spectrally efficient, but efficient on the club pocket book. Else you have to deploy separate APRS and voice repeater feedlines and antennas.

The framework is open so some development and evolution is possible. This paves the way for additional functionality that can be added later.

And it can be done remotely (SSH) since this is a digital system. No more spending $$ on new controllers and scheduling trips to the site to interface them.

D-Star helps attract a new breed to the hobby. The computer savvy. Which is good, since we should be one the path to software defined radio (SDR).

Some of my dislikes:

-Closed codec.
-User radios are not firmware upgradable
-DTMF encoding implemented wrong ?
-The term "D-Star" trademarked by Icom
-Attitudes
-One vendor

The attached images shows some starter ideas of how to add additional functionality.

One of the problems since ham radio is so stagnant is that no one really monitors. It becomes so infrequent that people are on at the same time. Those once 24/7 radio active hams are now amusing themselves with Ipods and smart phones.

So one of the script ideas report the callsigns of who is in the air to twitter. This way people know when to put down the Ipod and pick up the HT. Other scripts report current temperatures as text messages periodically.

An AMBE open source compatible codec?

First some history:

Depending on your point of view, Jon Lech Johansen is either your hero or adversary. To the copyright industry, Jon Lech Johansen has been a detriment to their policy of control since the advent of DeCSS (Decrypt Content Scrambling System.)

At the age of 15, “DVD Jon” wrote a computer program that allowed users to copy DVDs. Then he posted it on the Internet. A Norwegian private school awarded him a prize for making an outstanding contribution to society. The Norwegian government indicted him.

Jon spent 3 long years in the Norwegian courts proving his innocence. The American movie industry pressured the Norwegian Economic Crime Unit to press charges against Jon Lech Johansen in 2000 for allegedly bypassing the CSS copy protection on DVDs.

Early on; Bruce Perens, K6BP, amateur radio and open source advocate voiced concerns about D-Star’s use of a proprietary vocoder. Asking; does it really fit into the spirit of the hobby? Bruce makes a strong argument that an Open Source vocoder needs to be developed.

In May 2008, he announced that he will investigate the development of an alternative codec. The Codec2 Project: Next-Generation Audio Codecs and Vocoders for Two-Way Radio.

In August 2009 David Rowe, VK5DGR, began designing and implementing a replacement codec under the GPL.

“Proprietary codecs typically have small, novel parts of the algorithm protected by patents. However proprietary codecs also rely heavily on large bodies of public domain work. The patents cover perhaps 5% of the codec algorithms. Proprietary codec designers did not invent most of the algorithms they use in their codec. Typically, the patents just cover enough to make designing an interoperable codec very difficult. These also tend to be the parts that make their codecs sound good.”

Two open source compatible codec’s that come to mind:

Thomson Multimedia and Fraunhofer Society originally controlled the patents and licensing of the MP3 audio codec. Tip-toeing around the patented parts of the algorithms the LAME encoder was developed as free software application used to encode audio into the MP3 file format.

You might be surprised to find out that formats like Mp3 are actually someone's intellectual property, because the vast majority of Mp3 players and encoders don't pay royalties and are based on easily available implementations that have been out for years.

The DivX codec (used to compress lengthy video segments into small sizes while maintaining relatively high visual quality.) was actually an attempt by the now defunct U.S. retailer Circuit City to develop a video rental system requiring special discs and players.

The Xvid codec became a primary free and open source competitor offering comparable quality. It too was developed by tip-toeing around the patented parts of the DivX algorithms.

Many codecs, containers, file formats and other systems have been hacked to pieces and continue to be despite being the property of one party.

GIF images (up till 2006 when the patents expired) used a patented LZW compression scheme.

PDF is owned by Adobe but has been implemented by numerous others. there are many open-source and non-approved PDF viewers, editors and creators.

Unauthorized FLV players and converters exist as well. The same can be seen with real audio, real video, various Quicktime codecs, Dolby Digital AC3, AAC, and many others.

Think about it...... Do you like your freedoms? Thank those who have taken the time reverse engineered something. Welcome those types with open hands to the hobby. Those types of experimenters are just what this hobby once was and still can be.

{Update May 2010}
Interestingly enough the Digital Speech Decoder and xMBE codec library - can decode and recover the audio from P25 (Phase 1) IMBE, D-Star (AMBE), as well as Mototrbo/DMR (AMBE+2).  The open source software was unveiled by anonymous authors in May 2010.   It seems to have possibly stemmed from the May 2008 OP25 project, that provides a software IMBE voice encoder/decoder.  APCO Project 25 traces back to the early 1990's required publication of the IMBE and AMBE codec algorithms, which of course is how both projects came about.

It is important to note that so far there have been no take-down or patent violations filed from DVSI for these hobbyist adventures.  It should also be noted that the important patent claims may expire in 2015.  Basically all patents covering the AMBE-1000 chip have either expired or are not enforceable, due to disclosures made by DVSI.  See Bruce Peren's AMBE Exposed document for further information. 

It should also be mentioned that for most U.N. member states; non-commercial/research usage of patented technology is covered by exceptions on the definition of "patent infringement." Ref

Also worth reading: The Right To Reverse Engineer

DV Access Point Dongle (DVAP)

Unlike the DV Dongle, the new product allows Amateur Radio operators to walk away from the computer and transmit/receive D-STAR voice and data using a two meter D-STAR radio..... The DVAP is basically a GMSK modem with a 10 milliwatt two meter transceiver built in.

This is more crap for hard core D-Star enthusiasts. As if paying $200 for a regular DV dongle wasn't insane enough, just so you could talk AMBE over the internet using your PC microphone and speakers... now you can pay that plus the price of a D-Star radio, just to talk on the precious D-Star network.

Why in tar-nation Robin, AA4RC wasted any time designing the DV Access Point Dongle is beyond me.

It seems more logical to promote the GMSK node adapter hooked to a real retrofitted analog radio. Converting analog repeaters to D-Star at a fraction of the cost seems like something I'd get behind. At least then more than one person can use it.

This is another toy... that to me was a huge waste of engineering time. I thought Robin was going to work on a complete open replacement for the $300 Icom D-Star gateway software, hence www.opendstar.org.

All that has resulted is an add-on called D-plus, basically written to augment the DV dongle that Robin sells.

The AMBE decoder should be at the repeater end. Then users who want to talk on D-Star over their PC's can stream their voice using an open codec (no dongle) to the repeater, at which point it can be converted to AMBE with a community dongle.

Who is steering the D-Star boat? Will the D-Star newsletter ever promote such ideas? Or is it a mere advertisement to aid Icom and Robin in their financial endeavors?

Vellman K8055 & Activity Graphs

I recently picked up a Vellman K8055 interface board.

My original application was in conjunction with Jonathan, G4KLX's D-Star project. He has since added other methods of support for transmitter control, such as legacy serial port keying.

The Vellman board has 5 digital input channels and 8 digital output channels. In addition, there are two analogue inputs and two analogue outputs with 8 bit resolution. As one can imagine, it has a lot of potential applications.

I had a guy interested in my repeater activity graph scripting that I mentioned a few years ago. That was designed around repeaters with IRLP as this would just be a simple add-on for the Linux machine.

So for my first Vellman idea, I whipped up some perl code to watch a COR of a radio and provide the same logging and graphing functionality.

Refer to the original documentation if this interests you. I have updated it.

http://www.qsl.net/kb9mwr/projects/voip/activity-graphs.html

VOIP / Asterisk / Phone Interfacing

For nearly a decade I tinkered to my hearts content with various applications and packet radio. I learned an immense amount about TCP/IP. From DOS based NOS packages, which lead to ethernet networking the shack, later to Linux.

Well, I have been tinkering with Asterisk for about 6 years with the same enthusiasm. Much to my surprise, I learned that one of the original founders of our ham technology club has man of the same interests. So much love that Mike Kassner has the vanity callsign, K0PBX to reflect that.

When it comes to interacting with other people not in the hobby, messages (sometimes emergency) are relayed person (ham) to person, and the second most common way is by telephone.

As a mater of fact, telephone communication is probably the largest part of non-face to-face communication.

So like a good ham, being knowledgeable in how the telephone system works and is changing is always beneficial.

With some quick research you'll learn that SIP has become a widely adopted defacto protocol. You'll also learn that an open source Linux based application called Asterisk is a very powerful tool that many hams are playing with.

I was most pleased to notice that the second edition of Jonathan Taylor, K1RFD's VOIP book does elude to a whole new world using Asterisk and app_rpt.

In my opinion, the ham radio tie-ins are just starting.... What a perfect time to get jump on board and help develop something new.

http://nerdvittles.com/ - You'll find an immense amount of tinkering ideas here.

Southeastern Asterisk Radio Networks - Digital Amateur Projects Association (DARPA).

EmComm & AMSAT's Geostationary Satellite

A very interesting overview of AMSAT's phase IV Geostationary Satellite and the possible emergency communications implementations is in the Fall issue of CQ-VHF.

As you can tell I don't have a lot of love for Emcomm, but here is something that actually makes sense. A high speed multi-media capable, geostationary satellite.

AMSAT has recently begun negotiating with INTELSAT to get amateur radio communication payloads “piggybacked” on commercial geosynchronous communications satellites. This would be a first for amateur radio. It would allow earth stations to have 24/7/365 communications over a very large area using small fixed antennas. A small dish antenna would be able to access voice communications and text messaging. A larger dish antenna could provide access to video and high speed data. Because this has obvious value for emergency communications, AMSAT hopes to get considerable funding for this project from emergency communications agencies.

Hams are well acquainted with radio coverage problems while providing emergency communications. The high frequency bands suffer from hourly to daily propagation challenges. VHF and UHF simplex channels have limited geographic coverage. A repeater improves coverage while restricting all operations to its fixed channel pairs. Most of our current operating modes offer voice communications only. If data is transmitted it is supported at low rates such as 300, 1200, or 9600 baud.

I hope this gets some backing from the ARRL ARES directors. I honestly don't understand why and how all these recommendations come down the EC line to promote stuff like WinLink. They should all get behind something like this that makes sense, and help promote development and deployment of terrestrial HSMM networks.

Is amateur ARES / emcomm ‘a waste’?

This is a quick cheesy remake of a speech I have at a local club meeting. I didn't expect so many other bloggers to pick up on it.



Emergency communications has been part of ham radio from it’s inception. Yet we need separate entities (ARES/RACES) to help promote it? Why not separate entities to help advance this hobby?

“Do we need to keep maintaining an inefficient, overly-political, antiquated, bureaucratic emcomm-specific radio organization? No. Amateur radio operators have always been willing to help in times of true emergency, and that won’t change if ARRL didn’t have its grubby little hands all over it. ARES-type emcomm as we know it could use some restructuring and attitude changes. When all else truly does fail, agencies will still want us, whether we’re trained in ICS or not, and whether we’re ARES or not.” --- Kevin K0KDS

What you're seeing in an influx of people who have no interest in technology or experimenting.

CB is back. Remember the 1970s?

We have a generation of "communicators", people who pick up a cell phone or microphone and want to communicate (talk).

The underlying technology is of no interest to this generation.

Citing the need to grow the hobby, the entry criteria have been overly simplified. We now give a ham license in every Happy Meal sold.

The end result is the need for ARRL to create reason for people to become hams, Public Service.

Ham radio is nothing like it used to be, and will never again be a platform for experimenting and technology seekers. ---- [Callsign removed by request]
(From: http://www.eham.net/articles/22898)

In the January 2010 issue of QST on page 9 the “It seems to Us” editorial by K1ZZ is about just this same theme.

It’s titled “Not an Emergency Radio Service?” And references a FCC Public Notice DA 09-2259 that states “While the value of the amateur service to the public as a voluntary noncommercial communications service, particularly with respect to providing emergency communications, is one of the underlying principles of the amateur service, the amateur service is not an emergency radio service [emphasis added].”

Here are some other peoples blogs on my video:

http://sparqi.blogspot.com/2009/12/example-of-why-amateur-radio-is-failing.html

http://k9zw.wordpress.com/2009/12/06/kb9mwr-speaks-on-aresraces-is-a-waste/

Just to clarify, I'm not totally against it. Just recently locally I've noticed a huge emphasis on it. In my opinion there are other ares that we should be placing a much greater emphasis on. In other words, if you enjoy dedicating yourself the the drills and so forth, fine... just try not to take it to seriously.

From what I have seen the real thing never compares to a drill. Fortunately in the area I live in the last real emergency was the Weyauwega train wreck of 1996.

While lots of local hams responded, what stands out the most is that we were not wanted by the local emergency coordinators and other officials.

So building a good relationship with these guys can't hurt. It's even better when it helps you obtain access to tower sites. But please let it stop there.

In all the house bills that recognize Amateur Radio for emergency communications it is noted that we do this "as service to the public at no cost to taxpayers."

Yet I read about FEMA grants and other federal and state taxpayer assisted money being awarded and spent on various amateur radio installations.

This is the kiss of death in my opinion. And I obviously do not condone this.

I entered the hobby at a time when it was still ahead of consumer technology.  This is what brought me to the hobby.  I am not sure if I were to first learn about ham radio today, if I would be interested.

When I first entered the hobby, I participated more in the public service aspects.  It made sense to me.  I now view the commercial and consumer infrastructure as stable, and therefore have curtailed those activities a bit.  Perhaps on the other side of the coin, when I entered the hobby my technical abilities were less developed.  Either way, I generally view time spent in the hobby these days most productive when it is focused in the learning/technical and personal betterment arenas as opposed to the public service aspects.

Perhaps this is because I am adopting the old fear that if ham radio continues to loose status as a technical activity, we might also lose the privilege of operating on the public airwaves.  Logically the public service arena appears self sufficient now, unless some sort of major catastrophe occurs.  While on the other hand, the technical arena could use all the focus it can get to help foster new exciting ideas and developments in turn helping the hobbies growth and continued acknowledgement as a contributor to the technical art.